|
|
The VSI-Pro-Max-8 is the latest in the evolution of the popular VSI line of POS / Cash Register Interfaces from AVE. The VSI-Pro-Max-8, can now support up to 8 registers in one unit, additional VSI-Pro-Max-8 or single VSI-Pro-Max’s can be looped using RJ45 connections, also as per the VSI-PRO-MAX it comes with larger memory space to hold ALL the AVE Interfaces in one unit with full remote PC or DVR programming for selection and setups and onsite firmware updating. New video processing circuitry allows use with new WDR cameras and low video of commonly used UTP adapters. Built in RS-232, RS-485, Passive and the new Opto-Isolated selection, gives complete isolation from the POS/Cash Register from the video system. Internal 40 Mhz operation allows for combining the Networking functions of the Hydra, Regcom, Networker or Vnetworker within one convenient unit with looping RJ45’s for a seem less solution for multiple till configuration.
The VSI-Pro-Max range now supports programming of all units via one unit, so ideal for covert or difficult to reach installations.
The VSI-Pro range translates data from transactions at the cash register and overlays this information as text onto the video images from the CCTV system. This information is permanently embedded onto the images, and therefore cannot be tampered with. The combination of cash register data and CCTV images makes it easy to identify suspicious transactions such as the one on the left.
A quick review of the footage shows that this kind of transaction is easily discovered. Without the VSI-Pro range this transaction would have gone undetected as neither a review of the CCTV footage or the till receipts alone would anyone have identified this.
|
|
|
|
|
|
Upto 8 registers supported in one unit |
|
|
Easy
Menu driven Set up and programming |
|
Support of All AVE POS / Cash register interfaces in one box |
|
Supports Full Emulate Modes of Printers, Poll Displays or customer Displays |
|
Inbuilt Regcom/Hydra, Networker and Vnetworker Protocols with dual RJ45's |
|
LED's Showing Power, POS/Cash register activity, Network communication & Video loss |
|
Video Input Agc (Automatic Gain Control) |
|
Video Output BNC can drive two 75ohm loads |
|
Video Surge Suppression |
|
Video Lightning Suppression with external earth ground |
|
Connection
of multiple VSI-PRO-MAX's Via RS485 network |
|
Serial Input port selection RS232 Bidirectional, RS-485 Bidirectional, RS422, Passive (HiZ) or Optically Isolated |
|
Direct
connection to AVE cash-track DVR's and many other DVR brands |
|
RS-232 or RS-485 Output for direct DVR connection |
|
|
Auto
Baud Rate detection - eliminates internal dip switch setting |
|
|
24
Field programmable |
|
|
Numeric
ranges tied to Exceptions for greater than, less than, inside
a range of numbers or outside a range |
|
|
On-Screen
flagging of Exceptions |
|
|
Programmable
alarm and flag durations |
|
|
Serial
printer output of data or Exceptions |
|
|
Programmable
delay screen blanking |
|
|
Your
choice of 1 to 11 lines displayed on screen |
|
|
On-Screen
titler up to 40 Characters |
|
|
Gray
scale and border selection from front panel |
|
|
Built-in
test mode |
|
Built-in
cash register demo |
|
128K Program Memory and 128K SRAM Memory |
|
40 Mhz Internal Processing |
|
Pc Programming and Configuration |
|
Firmware Upgradeable on site |
|
Fully Programming and configuration locally or remotely by AVE DVR Vnetworker Protocol |
|
12v DC Operation |
|
|
CE/FCC & RoHS Compliant |
|
|
VSI-PRO-MAX offers alarm outputs, exception history with a time
and date stamp. The EX function gives hard alarm outputs
(contact closures). This alarm can trigger a VCR or switcher
to home to a camera watching a particular cash register,
Quad or a Speed Dome to go to a preset position when
certain types of exceptional transactions are detected.
The alarm outputs are accessed through the DB-9 connector
which plugs into the rear of the VSI.
|
VSI-PRO-MAX-8
Specifications
Video
in (BNC) x8
|
1v
P-P Terminated
|
Video
out(BNC) x 8
.
|
1v
P-P Terminated
2v
P-P Un-terminated
|
Power
(DC Coax)
|
9-12vDC 1.5A, 18V MOV Surge Suppression
|
Video
S/N |
..........Better
than 50dB |
Video
B/W |
..........Better
than 7Mhz |
Battery
backup (SRAM only) |
..........24h.
after 24h. charge |
Serial
Port Bidirectional (DB9 Female)
|
RS-232 OPTO |
RS485 / RS42 |
Passive Hi-Z |
Baud
Rates
|
AUTO,150,300,600,1200,2400,4800,9600,19.2K,28.8K,28.4K,57.6K,115,2K
|
Word Length |
7 or 8 |
Parity |
Odd, Even, None |
Stop Bits |
1 or 2 |
RTS / CTS Handshaking |
ON or OFF (3.3K Pull Up Jumper selectable) |
DTR / DSR Handshaking |
3.3K Pull UP (3.3K Pull Up Jumper selectable) |
Data Buffer
|
128K Bytes
|
Data / Network Port (RJ45 x 2 in Parallel)
|
RS-232 or RS-485 TDX only or RS-485 Bidirectional (Jumper selectable)
|
Alarm Outputs Pins 1 & 9
|
Open Collector 12VDC @ 12mA (Jumper Selectable)
|
Alarm Input Pin 7 (RTS)
|
Closure to ground, 12VDC Max
|
Real Time Clock
|
12 or 24 Hour with auto daylight saving
|
Date Format
|
DD/MM/YY , MM/DD/YY , YY/MM/DD Julian Calendar
|
Line Width
|
40 Characters
|
Number of Lines |
1-11 |
Screen Update Delay |
0.5s Auto scrolling from last line ON or OFF |
Line Processing |
Compress, Truncate, Space Compress, Left Justify, Scroll Matching |
Positioning
of text |
Anywhere
on screen
Character
gray scale (8 levels)
Matte character border gray (programmable)
Auto
scrolling from last line
Auto
line wrapping
|
DVR Support |
MVDR2000, MVDR3000, MVDR4000, MVDR5000, MV-DR16X, VISTA,
Plus any DVR with VSIADD compatibility
|
Local / Remote Programming |
PC software via RS232 Port |
Temperature Rating |
0-50 Degrees Celsius, 32- 122 Degrees Fahrenheit |
Humidity |
Non-Condensing 85% RH |
Weight |
0.68Kg or 1.5lbs |
Maximum Size with Connectors |
145L x 127W x 43H (mm) , 5.7L x 5W x 1.7H (in) |
Packed in White box with Manual |
1.02Kg or 2.26lbs |
Line Width |
40 Characters |
Typical
Configuration
 |
| Black |
Video
from the camera goes to video in on the VSI-PRO-MAX.
This camera typically watches the general area, including
the register, counter, employee and customer. Video
out from the VSI-PRO-MAX goes on to the existing video system. |
| Blue. |
Most new ECR have a RS232 output or can have an external device tapped, but some
low end registers require the installation of an RS-232
board from the register vendor. While others with no RS-232 ability
must be fitted with an additional interface module which converts the printer data to RS-232 for the VSI-PRO-MAX. |
| Red. |
Data from the VSI-PRO-MAX-8 is consolidated and transmitted to a compatible DVR in an addressable format or daisy chained to another VSI-PRO-MAX-8 or Hydra, then to the DVR
|
| optional |
The
optional EX function gives you 2 hard alarm outputs to trigger
alarming VCR's, Quads, or other alarming devices for
Exception reporting allowing easy review of exceptional
sales, or Instant reviewing on DVR's |
|
|
|
