American Video Equipment
Endeavour House
Coopers End Road
Stansted
Essex CM24 1SJ

Tel : +44 (0)845 600 9323
Fax : +44 (0)845 600 9363

E-Mail: sales@ave-uk.com

DIGI-SPEC
Four Channel Video Motion Detector

 

MOTION DETECTION YOU CAN TRUST


Video Motion Detectors (VMD’s) provide instant alarm verification by providing a video picture to security personnel and/or recording device, thus allowing for a quick and appropriate response.

VMD systems can drastically reduce installation costs as there’ll be no need to install cabling over vast distances or use some type of wireless link.

A single camera can protect a large area and can be selective in its detection in that area. With the use of "masking" (selecting only a part or parts of the video scene that the VMD will protect, ignoring activity in the unmasked portions), the VMD can discriminate between multiple zones created on one camera view. Depending on the performance (and cost), the system can be extremely sensitive, down to a single pixel of video.

 

VMD-1004

Advantages

Gives high performance outdoor video motion detection for any application where DVRs/Multiplexers leave off as they cannot handle true outdoor video motion detection
Hazardous areas can be monitored remotely
Target size, velocity and sensitivity programmable
Target tracking features
Direction Sensing
Change (mask) detection area dimensions (full or partial screen... multi-points)
Multiple detection zones for one camera with separate alarm outputs for each
Ability to accommodate for gradual illumination changes such as sunrises and sunsets.
Vibration detection and alarm suppression
Ability to discriminate between wind, rain, snow, blowing leaves, small animals or birds
Ethernet LAN module Adaptor available
In many cases timed alarm responses and computer communication ports to proprietary systems or large scale matrix switchers.
Alarm Inputs to AND/OR with other motion detection technology to further reduce false alarms.
Compatible with PTZ cameras
DSVMD windows based software to programme, control, status included free.

 

 

 

Specification

4 camera video switcher that has VMD (Video Motion Detection) on each camera OSD (on-screen) programming for switching dwell time, bypassing and motion dwell time along with the VMD setups is done via the 4 front panel push buttons.
99 levels of sensitivity Independent motion dwell times for all 4 cameras 1-30sec
4 Red LEDs for signify which camera is currently outputting. Simple on-screen programming menus
Excellent for covert applications   Tracking time: adjustable 0-8 second in 0.1 second increments